How To Set Up Rangextd Wifi Extender

RANGEXTD WiFi Rage Extender Instruction Manual

V.2

Introduction

RangeXTD is best used on Repeater Way by extending your existing 802.11n wireless WiFi betoken to black spots around your domicile or workplace. On Router Way Information technology can also be used every bit a WiFi router when wired to your modem or on AP Style when wired to your existing wireless router. RangeXTD supports 2.4G wireless network connectedness, and information technology can support 2.4G transmission speeds of upwards to 300Mbps. Information technology has 2X built-in antennas and provides excellent wireless performance, transmission rates and stability technology automatically avoids channel conflicts using its channel option feature.

Package Contents

• 1 x WiFi Extender/AP/Router (the device)
• ane x Instruction Manual
• 1 x RJ45 Cable

Hardware Overview

Default Setting
URL: 192.168.7.234
Login Countersign: admin
Wi-Fi SSID: RANGEXTD
WiFi Fundamental: None

WPS Push:

Press once to initiate WPS mode, press and concur WPS push button for half dozen seconds to activate WPS search manner on your device (on Repeater Mode).

Reset Pinhole Push button:

Printing and concur three Seconds to reset the device.

LED Indicators

POWER/WPS	ON: The Device is power on OFF: The Device is non receiving electrical ability Slow Flashing: The Device WPS waiting client connection Fast Flashing: The Device connecting to your AP/Router
LAN WAN/LAN	ON: The Ethernet port is connected OFF: The Ethernet port is disconnected Flashing: Data transferring

WiFi Indicate Strength Indicators (refer to the diagram on the right)

Way	one	2	3	Clarification
AP/Router	ON	ON	ON	Wi-Fi Indicate output power 100%
Repeater	ON	ON	ON	Excellent reception point forcefulness 50% to 100%
	ON	ON	OFF	Practiced reception bespeak strength 25% to 50%
	ON	OFF	OFF	Weak reception signal strength below 25%
	Flashing	OFF	OFF	Asunder

Getting Started

Setting up a Wireless Infrastructure Network

For a typical wireless setup at home (every bit shown beneath), please exercise the following:

WIRELESS REPEATER MODE

The device copies and reinforces the existing wireless signal to extend the coverage of the signal. This fashion is especially useful for a large space to eliminate point-blind spots. This mode is best for a big business firm, role, warehouse or other spaces where the existing bespeak is weak.

WIRELESS AP Mode

The device is connected to a wired network then transforms the wired Internet access into wireless so that multiple devices can share the Internet. This fashion is best used when at that place is intereference between rooms like a basement. Extend wired connection from router to device in basement to gain wireless signal to that area.

ROUTER Way

The device is connected to a DSL or cable modem and works as a regular wireless router. This mode is fit for an environment where Internet admission from DSL or cablevision modem is available for one user but more users need to share the Internet.

CONFIGURING THE WIFI REPEATER MODE

Configure via WPS Button

This is the easiest fashion to configure the device. First, bank check whether your wireless router supports WPS. For farther details, please read the operating instructions for your wireless router. If your router does not take a WPS button, skip this page and follow the adjacent page "Configure via Web Browser".

Tips: If y'all want to keep the stable connectedness between your router and RangeXTD on REPEATER way, please install the device at a suitable position.

You tin observe a suitable position by checking the indicate indicator on the device, if the LED is below 2 levels, delight detect new location.

STEPS

1. The mode selector on the device must be set to the "Repeater" position for Repeater Mode.
2. Plug the device into a wall socket. Plow on the device.
3. Press the WPS push for 1-2 seconds on the device. The WPS LED will slowly flashing for approx. 2 minutes.
4. Within these 2 minutes, please printing the WPS push of your Wireless Router direct for 2-three seconds. (For farther details, please read the operating instructions for your wireless router.)

The device will then automatically connect to your wireless router and re-create the wireless key settings. The device's WiFi password volition be the aforementioned as your AP/ Router. Subsequently you have finished rebooting, please get to your smart device (ie: telephone, computer, TV, Tv box, etc) WLAN setting to connect to the new SSID.

Configure via Web Browser (if no WPS button on router)

If your wireless router does not support WPS, you lot can configure the WiFi Repeater Style by connecting it with your smartphone/tablet/computer/laptop with enclosed RJ45 cable or wirelessly.

A. Configure the WiFi Repeater Manner wirelessly

A1. The mode selector must be ready to the "Repeater" position for Repeater Fashion. Plug the device into a wall socket. Turn device on.

A2. Click on the network icon ( or ) on the right lesser of your desktop. Yous will find the signal called RANGEXTD. Click on `Connect' then await for a few seconds.

A3. When connected, open up your web browser and enter 192.168.seven.234 in the browser address box. This number is the default IP accost for this device.

A4. The login screen beneath will appear. Enter the default countersign "admin" and then click 'Login'.

A5. Afterwards logging in, you will see the web page below, click on the "Repeater" push button to beginning setup.

A6. From the list, select a WiFi SSID. Afterwards having selected a WiFi SSID, you must so key in the password of that wireless router. You tin also give a new name for your RANGEXTD repeater.

When entered, click on the "Apply" push to configure and reboot. Later on the reboot, please get to your device WLAN setting, connect to the new WiFi SSID.

B. Configure the Wi-Fi Repeater Mode with RJ45 Cable.

B1. Plug the Device into a wall socket. Plow on device. Connect your computer / laptop with the Device with RJ45 Cable.

B2. Follow procedure A3 to A6 to configure the Device.

Resetting RANGEXTD

To restore factory default settings, press and concord the RESET pinhole button for 10 seconds and and then release, the indicators will all plow off. After you reset your device, unplug the information technology for 3 seconds. Plug it dorsum in and wait about 30 seconds, then check your WiFi network for the network chosen 'RANGEXTD' on your computer or mobile device.

*If your device is already configured to your network, you cannot admission the default IP address (192.168.vii.234). You must reset the device to access again.

Browse the below QR code for video instructions.

CONFIGURING THE WIFI AP MODE

Use the AP Way to obtain a "wireless access point". The wireless finish devices will connect to the RANGEXTD in this style. You tin can also use this mode, for example, to brand a formerly non-wireless-enabled router wireless-enabled.

STEPS

1. The way selector must be set to the "AP" position for Access Betoken Mode.
2. Plug the device into a wall socket. Turn on device. Connect your router with the Device with RJ45 cable.
3. When connected, open your web browser and enter 192.168.7.234 in the browser accost box.
4. This number is the default IP address for this device. The login screen below will appear. Enter the default password "admin" and and so click "Login".
   
5. Subsequently logging in, you will run across the web folio below, click on the "AP" button to start setup.
   
6. The following message will be displayed on your web browser: Enter the device wireless parameter. It's recommended that y'all rename an SSID, choose an Hallmark Mode and create a WiFi Countersign.
   

SSID	Create the wireless SSID/Proper noun of the device
Authentication Style	Setup the wireless security and encryption to prevent unauthorized access and monitoring. Supports WPA, WPA2, WPA/WPA2 encryption methods.
Countersign	Create a password for the device

Click on "Apply" button, the device will restart.

Later on the reboot has been completed, delight use your smart device'due south (smartphone/tablet/computer/laptop etc) WLAN setting to connect to new WiFi SSID that you created.

Resetting RANGEXTD

To restore factory default settings, printing and hold the RESET pinhole button for 10 seconds and so release, the indicators will all turn off. After you reset your device, unplug the it for iii seconds. Plug it back in and await about 30 seconds, so cheque your WiFi network for the network chosen 'RANGEXTD' on your computer or mobile device.

*If your device is already configured to your network, you cannot access the default IP accost (192.168.vii.234). You must reset the device to access once more.

Scan the below QR code for video instructions.

CONFIGURING THE WIFI ROUTER MODE

The device is connected to a DSL or cable modem and works as a regular wireless router. Internet access from DSL or cablevision modem is available for one user simply more users demand to share the Cyberspace.

STEPS

1. The mode selector must be prepare to the "Router" position for Router Mode.
2. Plug the Device into a wall socket.
3. Connect your DSL Modem with the Device with RJ45 Cable.
4. When connected, open your spider web browser and blazon 192.168.vii.234 in the browser accost box. This number is the default IP address for this device.
5. The login screen beneath will announced. Enter the default password "admin" and then click 'Login'.
   
6. After logging in, you lot will see the web page below, click on the "Router" push button to start setup.
   
   Choose your WAN Connectedness Blazon.
   
7. Enter the device wireless parameter. It'due south recommended that you rename an SSID, choose an Authentication Mode and create a WiFi Countersign. Click "Use" button, it will restart. Wait for a few seconds the Device is ready for utilise.
   

   SSID	Create the wireless SSID/Proper name of the device
   Hallmark Manner	Setup the wireless security and encryption to forestall unauthorized admission and monitoring. Supports WPA, WPA2, WPA/WPA2 encryption methods.
   Password	Create a password for the device

   7*. Choose your WAN connexion type.
   If PPPoE (ADSL Dial-up) is selected, delight enter the Account and Password from your ISP, these fields are case-sensitive.
   

8. * If Static IP is selected, please enter the IP Address, Subnet Mask, Default Gateway, DNS, etc.
   
9. * Enter the device wireless parameter. It'southward recommended that you rename an SSID, choose an Authentication Mode and create a WiFi Countersign. Click "Utilise" push button, it volition restart. Wait for a few seconds the Device is ready for use.
   

   SSID	Create the wireless SSID/Name of the device
   Authentication Fashion	Setup the wireless security and encryption to prevent unauthorized access and monitoring. Supports WPA, WPA2, WPA/WPA2 encryption methods.
   Password	Create a password for the device

Click on "Apply" push, the device volition restart.

Afterward the reboot has been completed, delight utilize your smart device's (smartphone/tablet/calculator/laptop etc) WLAN setting to connect to new WiFi SSID that you created.

Resetting RANGEXTD

To restore factory default settings, press and concur the RESET pinhole button for 10 seconds and then release, the indicators will all plow off. After yous reset your device, unplug the it for 3 seconds. Plug it back in and wait nearly 30 seconds, and so bank check your WiFi network for the network called "RANGEXTD" on your computer or mobile device.

*If your device is already configured to your network, y'all cannot access the default IP address (192.168.7.234). You must reset the device to access once again.

Browse the below QR lawmaking for video instructions.

Modify Management Countersign

Default password of the device is "admin", and information technology'southward displayed on the login prompt when accessed from spider web browser. There's a security risk if y'all don't change the default password, since everyone can see it. This is very important when you have the wireless part enabled.

To alter password, please follow the following instructions: Please click "Countersign" button on the direction setting interface, the following message volition be displayed on your spider web browser:

Click "Apply" button, the Device will log off.

If y'all forgot your existing password, you can reset the password by clicking the reset pinhole button on the side of the device for 10 seconds and and so release, the indicators will all plough off. After you lot reset your device, unplug the it for 3 seconds. Plug it back in and wait nearly xxx seconds, and so cheque your WiFi network for the network chosen 'RANGEXTD' on your computer or mobile device.

Firmware Upgrade

The organization software used by this router is called "Firmware", just like any applications on your estimator, when you replace the old application with a new ane, your computer will be equipped with new functions. You can also use this firmware upgrade function to add new functions to your router, even fix the bugs of this router.

Delight click "Upgrade Firmware" located at the management setting interface, and so the post-obit message will be displayed on your spider web browser:

Click "Scan…" or "Choose File" button first; you lot'll exist prompted to provide the filename of firmware upgrade file. Delight download the latest firmware file from our website, and use it to upgrade your router.

Afterwards a firmware upgrade file is selected, click "Upload" button, and the device will start firmware upgrade process automatically.

The procedure may take several minutes, please be patient.

Notation:

• Never interrupt the upgrade procedure by endmost the web browser or physically disconnect your computer from the device. If the firmware you uploaded is interrupted, the firmware upgrade will fail, contact customer support for assistance if needed.
• Warranty is void if you interrupted the upgrade process.

How to Connect your Computer/Laptop with the Device

Adding a wireless computer to the device

1. Log on to the computer.
2. Connect to a network by right-clicking the network icon ( or ) in the notification area.
3. Choose the wireless network from the list that appears, and then click Connect.
4. Type the network security key or passphrase if you are asked to exercise and so, and then click OK.
   You'll see a confirmation bulletin when y'all are connected to the network.
5. To ostend that you lot added the computer, please do the post-obit: Open network by clicking the Kickoff button , so clicking Command Panel. In the search box, type network, and then, nether Network and Sharing Centre, click View network computers and devices. You should see icons for the computer yous added and for the other computers and devices that are function of the network.

Annotation:

If you don't see icons in the Network folder, then network discovery and file sharing might be turned off.

Scan the below QR code for MAC set up up

Difficulties with setting up your Device?

We are here to help!

Please visit https://support.myrangextd.com/ or scan the QR code for any urgent inquiries!

WEEE Directive & Production Disposal

At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electric and electronic equipment, or returned to the supplier for disposal.

FCCID NO: 2AVK9-30251

FCC Alert

This device complies with part 15 of the FCC rules. Operation is subject to the post-obit 2 conditions: (ane) this device may not crusade harmful interference, and (2) this device must take any interference received, including interference that may crusade undesired functioning.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and establish to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, in that location is no guarantee that interference will non occur in a item installation. If this equipment does cause harmful interference to radio or television set reception, which tin can be adamant by turning the equipment off and on, the user is encouraged to endeavour to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increment the separation betwixt the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/Television set technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled surroundings. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Canada EMC statement

This device complies with RSS 210 of the Industry Canada Rules. Operation is subject to the post-obit two conditions: (1) this device may non crusade interference, and (2) this device must take any interference, including interference that may cause undesired operation of the device.

This Class [B] digital apparatus complies with Canadian ICES-003.

This equipment complies with Canada radiation exposure limits gear up forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance of 20cm （may exist adjusted according to actual calculation upshot） between the radiator and your trunk.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Documents / Resources

References

• RangeXTD

Source: https://manuals.plus/rangextd/wifi-range-extender-manual

Share this post